One Piece Multi-Ball Steel Ball Mounts
Triple Ball for 2" Receiver
- Solid Steel Tube
- It Fits Into a 2" Receiver and Has A:
- 1 7/8" Ball with 2,000 lb. capacity
- 2" Ball with 10,000 lb. capacity
- 2 5/16" Ball with 16,000 lb. capacity
|
|
Triple Ball with Tow Hook for 2" Receiver
- Solid Steel Tube
- It Fits Into a 2" Receiver and Has A:
- 1 7/8" Ball with 2,000 lb. capacity
- 2" Ball with 5,000 lb. capacity
- 2 5/16" Ball with 10,000 lb. capacity
- Tow Hook with 10,000 lb. capacity
|
|
Triple Ball for 2 1/2" Receiver
- Hollow Shank Tube
- It Fits Into a 2 1/2" Receiver and Has A:
- 1 7/8" Ball with 2,000 lb. capacity
- 2" Ball with 10,000 lb. capacity
- 2 5/16" Ball with 14,000 lb. capacity
|
|
|
Optional Lock to Insure Security Can Be Purchased Here
|
Specialty Ball Mounts
Standard 2" Combo Stack Bar
- For 2" Receivers Only
- Allows For Mounting Bike Carriers While Towing
- 8" From Hole To Hole On Bottom Tube & It IS Solid Steel
- 5" From Hole In Receiver to First Contact of Upper Tube
- Two 2" Tubes
- Upper Is For Accessories, Which is 3" Above the Bottom One
- Lower Is For Towing
- 3,500 lbs. Gross Towing Weight & 350 lbs. Tongue Weight
- Corrosion Resistant Black Epoxy Finish
|
|
Extended 2" Combo Stack Bar
- For 2" Receivers Only
- Allows For Mounting Bike Carriers While Towing
- 12 1/4" From Hole To Hole On Bottom Tube & It Is Hollow
- 7 1/4" From Hole In Receiver to First Contact of Upper Tube
- Two 2" Tubes
- Upper Is For Accessories, Which is 3 3/4" Above the Bottom One
- Lower Is For Towing
- 4,000 lbs. Gross Towing Weight & 400 lbs. Tongue Weight
- Corrosion Resistant Black Epoxy Finish
|
|
2" Multi-Use Ball Mount
- For 2" Receivers Only
- 2" Drop Ball Mount
- 7,500 lb. towing capacity, 750 lb. Tongue Weight
- Allows For Mounting Bike Carriers While Towing
- 12 1/4" From Pin Hole To Center of Ball
- Upper Tube is 4" Above the Base of the ball mount to Bottom of the Opening
- Corrosion Resistant Black Epoxy Finish
|
|
Standard Convert-A-Ball Cushioned Ball Mounts
- For 2" Receiver
- Provides a Cushion Inside The Ball Mount So That The Hitch Does Not Take A Beating From The Trailer
- Solid Steel Tube
- 10,000 lb. Rating and Requires a Ball With a 1" Shank
- MADE IN USA
|
|
Heavy Duty Convert-A-Ball Cushioned Ball Mounts
- For 2" Receiver
- Provides a Cushion Inside The Ball Mount So That The Hitch Does Not Take A Beating From The Trailer
- Solid Steel Tube
- Rating of 14,000 lb. Gross Towing & 2,000 lbs. Tongue Weight
- Requires a Ball With a 1 1/4" Shank
- MADE IN USA
|
|
Super Duty Convert-A-Ball Cushioned Ball Mounts for 2 1/2" Receiver Hitches
- For 2 1/2" Receiver
- Provides a Cushion Inside The Ball Mount So That The Hitch Does Not Take A Beating From The Trailer
- Solid Steel Tube
- Rating of 18,000 lb. Gross Towing & 2,000 lbs. Tongue Weight
- Requires a Ball With a 1 1/4" Shank
- MADE IN USA
|
|
Convert-A-Ball Multi-Hitch with Internal Cushion
It Fits Into a 2" Receiver and Has A:
- 1 7/8" Ball - 2,000 lb. Capacity
- 2" Ball - 10,000 lb. Capacity
- 2 5/16" Ball - 10,000 lb. Capacity
- Clevis Pin - 10,000 lb Capacity
- MADE IN USA
|
|
Clevis Ball Mount
- Clevis Mount for Lunette Ring Trailer Coupler
- Designed for Use With Industrial or Agricultural Equipment
- Fits All 2" Receivers
- Must Purchase Clevis Pin Separately (below Clevis Mounts)
|
|
Universal Receiver Spare Tire Carrier
- Fits Into Standard 2" Receivers
- Universal Fit For All Makes of Rims
- No Assembly Required
- Handles Up To 125 lbs.
|
|
Roadmaster Receiver Spare Tire Carrier With Built-In Receiver
- Fits Into Standard 2" Receivers
- Fits 5 Wheel Sizes: 16", 16.5", 19.5", 22.5" & 24"
- Built In Receiver Allows For Towing A Car or Attaching ABike Rack or Accessory
- 6,000 lb Towing Capacity, 400 lb. Tongue Weight
|
|
Winch Mount
- Fits Into Standard 2" Receivers
- No Assembly Required
- Roller Fairlead Mounting Points
- Universal Design Supports Most Major Winch Models Including Ramsey, Warn and Super Winch
|
|
