Hitch Adapters

1 1/4" to 2" Adapter This Converts a 1 1/4" Receiver to a 2" Receiver One Piece Design Only To Be Used For A Cargo Carrier or Bike Rack BR_HTAD...$54.99
1 1/4" to 2" Adapter with 5" Rise This Converts a 1 1/4" Receiver to a 2" Receiver Extends 6 1/2" with a 5" Rise PLEASE VERIFY THAT THIS WILL FIT INTO YOUR HITCH WITHOUT ANY INTERFERENCE - The Rise Starts 3" From Center of Pin Hole in Trailer Hitch One Piece Design Only To Be Used For A Cargo Carrier or Bike Rack BR_HT5R...$62.99
2" to 1 1/4" Adapter This Converts a 2" Receiver to a 1 1/4" Receiver One Piece Design Only To Be Used With A Cargo Carrier or Bike Rack BR_HT02...$51.99
2" to 1 1/4" Adapter - 7" Long This Converts a 2" Receiver to a 1 1/4" Receiver One Piece Design - 7" Long Only To Be Used With A Cargo Carrier or Bike Rack DT_80300...$39.99
2" to 1 1/4" Adapter - 14" Long This Converts a 2" Receiver to a 1 1/4" Receiver One Piece Design - 14" Long Only To Be Used With A Cargo Carrier or Bike Rack DT_80301...$68.99
2" to 1 1/4" Adapter - 18" Long This Converts a 2" Receiver to a 1 1/4" Receiver One Piece Design - 18" Long Only To Be Used With A Cargo Carrier or Bike Rack DT_80302...$59.95
2 1/2" to 2" Adapter This Converts a 2 1/2" Receiver to a 2" Receiver One Piece Design DT_58102...$25.00
2 1/2" to 2" Adapter WITH Collar This Converts a 2 1/2" Receiver to a 2" Receiver The Collar Makes It A Snap To Lineup DT_58431...$43.99
3" to 2 1/2" & 2" Adapter This Is A 2 Piece Set 1st Piece Set Converts 3" Receiver To 2 1/2" 2nd Piece Set Is Added To Reduce to 2" Receiver CT-45408...$45.00
3" to 2" Adapter This Converts a 3" Receiver to a 2" Receiver DT_38735...$75.00
HD 3/4" Pin & Clip For 3" to 2" Adapter listed above - DT-38735 This IS The Required Pin & Clip For the Above Listed a 3" Receiver to a 2" Adapter DT_58388...$40.99

Anti-Rattle Products

Anti-Rattle Device

Brophy 2" Receiver Stabilizer
- Easy To Use, Simply Tighten The Two Wing Knobs
- Needs 1" of Clearance to Mount
- BR_RHSB...$28.99

Clamp Plate & U-Bolt

Easy To Use, Simply Tighten The Two Nuts
BR_RSCP...$19.95

Quiet Hitch

Quiet Hitch eliminates any free play between the receiver and the tow bar (or bike rack, ball mount or whatever you insert) for a solid, seamless connection
Consistent pressure keeps your towing combination tracking straight through crosswinds, curves and sudden maneuvers all with considerably less effort on your part
Quiet Hitch also reduces tire wear, as well as wear and tear on the hitch and the receiver by eliminating free play
Especially effective on towing combinations with multiple hitch extensions; also reduces rattle caused by bike racks or hitch accessories

Bolts on in seconds

For 1 1/4" Receiver
RM_061-125...$29.99

For 2" Receiver
RM_061...$33.09

For 2 1/2" Receiver
RM_062...$52.99

Draw-Tite J-Pin

It Is Both A Lock and Anti-Rattle Device
Designed for the New Style Draw-Tite 2" Receivers with the Extra 17/32" hole
Attachment Wrench Included
DT_63201...$39.99

Trimax Tightening Hitch Pin with Lock

It Makes The Ball Mount/Receiver Connection Completely Rigid
Protect Your Investment by Keeping It Locked
Chrome-Plated Hardened Steel
Round Key. Wont break like Flat Keys.
Watertight Cap Seals Out Moisture and Dirt, Preventing Corrosion
For Use with Any 2" Hollow Ball Mount
TR_TAR300...$33.99

(c) Copyright 2021 Hitch Corner, Inc.
10677 W. Centennial Rd. #103
Littleton, CO 80127
Littleton - 303-904-1558
Denver - 720-277-7782